|
Customer Car Spotlight
The projects and cars we post in this area of the site are not limited to only new projects that we may have completed in 2007 at the launch of this section. Alternative Auto has done some very cool, modern, street-able and fast Ford projects since 1990 when it all started here.
So what we’re gonna do is try to post new stuff as it happens. And then as some of the previous and older projects we’ve done in the past may come back to us for maintenance or updates we’re gonna try to mention those as well when we get current PIC’s of them such as on our dyno, or simply at our facilities.
|
|
|
 |
2005 GT 5.0 3V Stroker!
This beautiful black 2005 Mustang GT has a hygienic & sleeperish appearance to it. With its clean lines and subtle exterior changes you might not guess what is sitting under the hood.
Click here for the details.
|
|
 |
2010 Shelby GT-500!
For 2010 the Shelby GT-500’s came with a 40hp bump up over the 2007 thru 2009’s. And as tasty as 540hp at the Flywheels sounds in stock form…. It’s not nearly as mouth watering as 652hp at the rear wheels, along with a very broad torque range starting from 1500 all the way to limiter at 6800. With 616ft lbs of torque at the rear wheels, combined with the now larger 3.73 gears in the axle – this car gains speeds and accelerates extremely quick in any gear.
Click here for the details.
|
|
 |
660HP LX!
To some this might seem like an old school car and powertrain these days, but there is nothing wrong with an old school ass beating either! This clean Fox-Body LX will hand out the beatings like none other on the streets of Michigan’s South east side of the state. With 660hp at the rear wheels, and the nimble light weightness of an LX, your only hope of survival if you role up next to this one is to simply bow down.
Click here for the details.
|
 |
'07 Drop Top
Our next spot light car is a great looking 2007 GT rag top car. This customer asked us to build him a totally streetable, fully dressed late model Mustang with a 5-speed automatic that would run deep into the 11’s or high 10’s in the ¼ mile by leaving it in “Drive”.
Click here for the details.
|
 |
'05 Saleen
This beautiful and clean 2005 Saleen has the looks and performance to match all in one neatly done convertible package.
Click here for the details.
|
 |
'92 Mustang LX
This ‘92 Wild Strawberry Metallic LX is another fine example of a clean, well done Fox body. Sporting big 18” Bullitt style wheels all around, and a Mickey Thompson 315/18” Drag radial neatly tucked into the stock inner rear wheel well and fender openings. Aside from the special edition wing, the rest of the exterior is stock appearing.
The interior is all stock too.
Click here for the details.
|
 |
'04 Marauder
For this time around we decided it was time to spotlight another well done Ford/Mercury -- rather then a Mustang.
Click here for the details.
|
 |
'88 LX
Ordinarily we’d highlight a customer car in this section, but this time around I’d like to display one of my own Mustangs that’s gone through many performance and cosmetic changes since its birth in 1988. I won’t dwell to much on its history.
Click here for the details.
|
 |
'05 GT
Our latest customer car is a NY based 2005 GT that has gone through some major changes -- both in appearance, and with the entire power train. We were commissioned to perform a major upgrade to the motor, trans, exhaust and engine management.
Click here for the details.
|
 |
'88 Saleen
Alternative auto was giving the privilege of being able to perform the type of work we're best known for; clean, organized and full street-ability to this super clean and low mileage, all original '88 Saleen.
Click here for the details.
|
 |
Mystic Chrome '04 Cobra
This customer spotlight Mystic Chrome ‘04 Cobra is one of the most powerful Terminators and late model Mustangs in general that we’ve been involved in.
Click here for the details. |
 |
2004 Mach 1
This customers orange 2004 Mach-1 shows a simple, clean appearing exterior and under hood area, but inside all this simple appearance it sports a 4.6L that’s now stroked to a 5.0L and uses Alternative auto CNC ported 32V heads.
Click here for the details.
|
|
|
